Business connectivity
Apartment & MDU WiFi
Property-wide WiFi is now an amenity residents shop for, not a utility they arrange themselves.
- Starting at $100 per room for high-density deployments
- Into every unit and across every common area
- Design, equipment, deployment and support on one quote
We design coverage that reaches into every unit and across every common area, with the connectivity behind it, starting at $100 per room for high-density deployments.
- Unit of scope
- The residential unit, plus every common and amenity area
- Starting rate
- High-density deployments start per unit; quoted per property
- Also in scope
- Clubhouse, fitness, pool, garage, leasing office, outdoor areas
- Accountability
- Design, equipment, deployment and support on one quote
Get a quote
Apartment & MDU WiFi
Tell us where to reach you and a Uniqcli specialist follows up by email to scope the locations with you, then comes back with a written quote. Serviceability and the final figure are confirmed per location.
The first number is our real one, not an opening one.
Tell us the scope and we come back with the best price we can do on it.
- Supporting federal, state & local purchasers
- GPC & P-Card accepted
- TAA & NDAA-889 screening before every quote
The amenity that moves in before the resident does
Property-wide WiFi has quietly become one of the few amenities a prospective resident can evaluate on the tour: it either works in the unit they are standing in or it does not. Offering it changes what a lease is worth, removes the week of dead time between move-in and a carrier appointment, and turns an individual utility into something the property controls and can be judged on.
Continue readingShow less
It also changes what the property owns. A managed property network means the coverage in every unit, the clubhouse and gym, the garage and the outdoor spaces are one system with one design and one support path, rather than a hundred separate routers of unknown vintage stacked against each other. We quote high-density deployments from $100 per room. Everything outside the starting rates above is sized rather than priced on a web page: the figure that binds is a written quote against your own addresses, terms and equipment list.
What a property-wide design has to solve
Four problems, and only one of them is the unit itself. Assess, design, procure, support: we scope the requirement with you, design against it, source the circuits and equipment, and stay the single point of contact through turn-up and afterwards.
Coverage inside the unit, not just to the door
A resident judges the network in the back bedroom, not in the hallway. Whether that means a radio inside each unit, a design that covers a small cluster of units, or a hybrid depends entirely on how the building is built — a 1970s block-wall mid-rise and a modern wood-frame garden community produce different answers, and so do units on either side of an elevator core.
Continue readingShow less
High-density work starts at $100 per room, and the design is what makes that figure honest.
A private network per resident
Property-wide does not mean everyone shares one flat network. Each household needs its own private space so that a resident can see their own printer, speaker and television and nobody else's — and so that a smart lock or a thermostat belongs to that unit alone.
Continue readingShow less
That isolation is a design decision made up front, and it is the difference between an amenity and a liability.
Common areas that get used at the same time
Clubhouse, fitness room, pool deck, coworking lounge, mail room, garage and courtyards are where the amenity is actually shown off — and where load concentrates on exactly the evenings and weekends the network is being judged.
Continue readingShow less
Structured parking and stairwells are their own coverage problem and are scoped explicitly rather than assumed.
The connectivity behind the property, and one contact
A property network is only as good as what feeds it, so the circuit is sized against the resident count and what those households actually do, then quoted alongside the equipment.
Continue readingShow less
Circuits are provisioned through our carrier network relationships and quoted per location; equipment is sourced through our distribution network. Naming a service type describes what we quote, not a partnership with any provider. Enterprise-grade access points, controllers and switching are quoted through our distribution network against the design, rather than listed with a shelf price.
Quote property-wide resident WiFi
Go to the formWhat we'll ask at quote
Enough to size the property honestly. Most of it is in your leasing materials, and a walk-through settles whatever is not.
- Unit count and mix — studios through three-bedrooms — plus building count, floor count and whether it is garden style, mid-rise or high-rise
- Construction and vintage: block or concrete demising walls, wood frame, when it was built, and whether a renovation is underway
- Every common and amenity area to be covered, including the leasing office, fitness room, clubhouse, mail room, garage and outdoor spaces
- Whether internet is bundled into the lease today, and if so, how it is delivered and when that agreement ends
- How you want residents to get online — a code at move-in, a per-unit credential, or something the leasing team can issue on the spot
- What is installed now: any existing property WiFi, the cabling between buildings and to each unit, and where the equipment rooms are
- Property systems that share the network — access control, smart locks and thermostats, package rooms, cameras and the leasing office itself
- Whether the internet circuits are in scope for the same quote, and who residents call when something does not work
Bulk connectivity, retention and what the property actually controls
The financial argument for property-wide WiFi is usually made as an amenity fee, and that is the least interesting half of it. The more durable half is control. When connectivity is arranged unit by unit, the property owns none of the experience and all of the complaints — a resident whose service was never installed, an outage nobody on site can diagnose, a move-out that leaves equipment behind. When it is a property amenity, the network is an asset with one design, one support path and one vendor relationship, and it can be improved deliberately rather than a unit at a time.
Continue readingShow less
Retention follows from the same place, and it is worth stating carefully rather than dressing up with numbers we have not measured. A resident who moves in and is online the same hour, whose network reaches the back bedroom, and whose smart devices simply work has one fewer reason to look elsewhere at renewal — and one fewer reason to write about your property somewhere public. That is a real effect and an honest one; anyone quoting you a retention percentage for a WiFi upgrade is selling you a number they invented.
The technical shape that supports all of it is bulk connectivity sized against the property rather than the unit. One or more circuits into the property, capacity planned against how many households are online at nine on a Sunday evening rather than against a headline speed per unit, and a segmented design that keeps each household private while letting the property manage the whole. We scope the circuit and the wireless together, because sizing one without the other is how a property ends up with excellent coverage of a saturated connection.
What else the property usually scopes at the same time
Residential properties tend to buy the network, the connectivity and the security equipment on one capital plan — these are the lanes most often quoted together.
Apartment and MDU WiFi questions
What does the per-unit starting rate cover?
High-density deployments start at $100 per room, and that is a starting point for the in-unit design rather than a property total — common areas, garages and outdoor spaces, the wired work behind the access points, and any cabling the buildings need are scoped on top. Everything outside the starting rates above is sized rather than priced on a web page: the figure that binds is a written quote against your own addresses, terms and equipment list.
Can each resident have their own private network?
Yes, and it should be the default rather than an upgrade. Each household gets its own isolated space on the property network, so a resident sees their own devices and nobody else's, and a smart lock or thermostat stays attached to the unit it belongs to. How residents receive their credential — at move-in, from the leasing office, or through a self-service page — is a scoping decision we make with your leasing team.
Does this replace the resident's own internet service?
That is your decision, and both models are common. Some properties bundle connectivity into the lease and market it as an amenity; others run the property network alongside whatever a resident chooses to buy independently, which still covers the common areas and gives new residents something that works on day one. We scope the circuit and the design differently for each, so it is worth telling us which direction you are leaning before we quote.
How do you deliver this — do you own a network?
No. Circuits are provisioned through our carrier network relationships and quoted per location; equipment is sourced through our distribution network. Naming a service type describes what we quote, not a partnership with any provider. Coverage is nationwide and confirmed per location at quote — what is deliverable to a specific address depends on which carriers reach that building, so we check it per site rather than publishing a map.
Which equipment do you use, and who supports it afterwards?
Enterprise-grade access points, controllers and switching are quoted through our distribution network against the design, rather than listed with a shelf price. TAA (FAR 52.225-5) and NDAA §889 screening is performed on every hardware line, before the quote goes out. Assess, design, procure, support: we scope the requirement with you, design against it, source the circuits and equipment, and stay the single point of contact through turn-up and afterwards.
How fast can you get a quote back?
How quickly a quote comes back depends on how many addresses have to be checked and which carriers serve them; a single site is usually straightforward, and a multi-site scope moves at the pace of the slowest address. We tell you where each location stands rather than holding the whole quote for the last one.
Send the property, get a design that reaches every unit
Unit count, construction and your amenity spaces are enough to start. We come back with a design approach, an equipment list and a written quote — with the circuits and the security equipment on the same order if you want them there.
Continue readingShow less
Service commitments are backed by the underlying carrier's published service terms, which are provided with your quote rather than summarized here.
The solutions atlas
Every solution, one accountable partner.
UniQ platforms
By technology
By customer
- TAA & NDAA-889 Compliance Screening
- CMMC & CUI Solutions
- Federal & DoD
- State, Local & Education
- Healthcare
- Enterprise
- Rapid Procurement & GPC Buys
- Multi-Vendor Integration Projects
- eProcurement & Custom Catalogs
- FISMA Modernization
- CJIS-Compliant Justice Cloud & Local AI
- Federal Storage Modernization
- Government ERP & Business Systems Infrastructure
- Managed Procurement
- Secure AV & Conferencing
- Fiber Network Infrastructure
- Satellite & Resilient Connectivity
- Wavelength & Optical Transport
- Decentralized Data Centers
- Data Center Design & Build
Quote property-wide resident WiFi
Send the unit mix, the buildings and the amenity areas. You get a design approach, an equipment list and a written quote covering units and common areas as one network. Everything outside the starting rates above is sized rather than priced on a web page: the figure that binds is a written quote against your own addresses, terms and equipment list.