Working bench + calibration certificates on delivery
Built for
Federal, defense and university R&D labs
Overview
Calibration-grade instrumentation, with the paperwork to prove it
A test instrument without NIST-traceable calibration documentation is a liability the moment your lab faces an audit or an ISO 17025 assessment. Uniqcli sources test and measurement instruments, lab IT infrastructure and calibration-grade equipment with traceable certificates delivered alongside the hardware, not tracked down after the fact.
How we work
Instrumentation scoped to the test method
We scope test and measurement instrumentation against the specific test method or standard your lab runs to — accuracy class, measurement range and environmental operating conditions are pulled from the standard, not assumed from a general-purpose spec sheet.
Lab IT — data acquisition systems, networked instrumentation, secure data storage for controlled or export-sensitive test data — is integrated alongside the instruments themselves, so a facility stand-up delivers a working test bench, not a pallet of individually boxed equipment.
▪Test and measurement instrumentation scoped to your test method
▪NIST-traceable calibration certificates delivered with equipment
▪Lab IT integration — data acquisition, networked instrumentation, storage
▪Environmental and EMI/EMC test equipment for compliance labs
Test and measurement instrumentation is scoped against the specific test method or standard your lab runs to. Accuracy class, measurement range and environmental operating conditions come from the standard itself, so the instrument is matched to the measurement uncertainty the method demands rather than a general-purpose datasheet.
When a facility is standing up or expanding, instruments are specified alongside the bench they'll live on — power, bench space, fume and vibration constraints included — so what arrives is a working configuration, not a pallet of individually boxed equipment.
▪An orderly R&D lab aisle of parallel instrumentation benches receding toward a bright window.
▪Accuracy class and range pulled from the governing test method
▪Measurement-uncertainty fit checked before selection
▪GC/MS, electrical, RF and general-purpose T&M instrumentation
▪Bench, power and environmental constraints scoped with the instrument
▪TAA country-of-origin documented for federally funded programs
Calibration & traceability
A calibration certificate is only as trustworthy as the traceability chain behind it: it ties the instrument's readings back to a national standard through an unbroken sequence of comparisons, each with its own stated measurement uncertainty. We source instruments so that certificate arrives in the same delivery as the hardware, so a reading isn't challenged at audit for want of the paper that proves where it came from.
Labs operating under ISO/IEC 17025 or an internal quality system need calibration records, certificate uncertainty data and maintenance history that survive an assessor's review. We track calibration due dates as part of the equipment record we hand over, so recertification is a scheduled task rather than a scramble before an audit.
▪A comparison calibration setup on a granite surface plate with tiered reference standards racked behind.
▪NIST-traceable calibration certificates included at delivery
▪Calibration certificates and their uncertainty data kept in the equipment record
▪Due-date tracking and recertification scheduling support
▪Documentation built to survive an ISO/IEC 17025 or internal-audit review
▪Chain-of-custody records where the program requires them
Lab IT & data acquisition
Lab IT is integrated alongside the instruments themselves — data acquisition systems, networked instrumentation and secure data storage for controlled or export-sensitive test data — so a facility stand-up delivers a working test bench rather than disconnected equipment.
Where test data carries controlled-unclassified or export-sensitive handling requirements, storage and network segmentation are specified to match, so the data plane meets the same review the physical bench does.
▪A lab-IT corner with a blank-faced server rack and DAQ chassis cabled to instrument-control workstations.
▪DAQ systems and networked instrumentation integrated with the bench
▪Secure storage for controlled or export-sensitive test data
▪Instrument-control workstations and lab network hardware
▪Segmentation and access sized to the data's handling requirements
▪Delivered as a working configuration, not loose boxes
Compliance & environmental test
Compliance labs need equipment sized to the regime a product has to clear. EMI/EMC test gear, environmental chambers and safety-test instrumentation are scoped against the standard and the product envelope, so the lab can actually run the qualification it exists to run.
New and expanding facilities are sequenced against the construction or fit-out schedule, so calibration-sensitive equipment isn't sitting in an uncontrolled environment before the space is ready to receive it.
▪An open thermal-vibration chamber with a device-under-test fixtured on a shaker table and sensor looms running out.
▪EMI/EMC and emissions/immunity test equipment
▪Environmental and thermal chambers for qualification testing
▪Electrical-safety and product-safety test instrumentation
▪Delivery sequenced to the facility fit-out schedule
▪Calibration-sensitive equipment protected until the space is ready
What's included
Instrumentation, documented and audit-ready
▪Test and measurement instrument sourcing to test-method accuracy requirements
▪NIST-traceable calibration certificates included at delivery
▪Lab IT integration — DAQ systems, networked instruments, secure storage
▪EMI/EMC and environmental chamber equipment for compliance testing
▪Calibration due-date tracking and recertification scheduling support
▪TAA-compliant sourcing for federally funded lab programs
Brands we carry
Test, measurement and lab-IT brands
Calibration-grade instruments plus the lab-IT and power protection that keep a bench running.
Representative hardware from the live Uniqcli catalog — sourced through authorized distribution, TAA-screened per line, and configured for the mission before it ships.
The same record travels through every lane — what was sourced, where it came from, who touched it and when it shipped. It's attached during sourcing, not reconstructed when an audit asks.
▪TAA country-of-origin confirmed per lot (FAR 52.225-5)
▪NDAA §889 covered-equipment screening on every line
▪Serialized chain-of-custody records with every shipment
▪Section 508 / VPAT documentation available on request
Questions
Frequently asked
▪Does calibration documentation ship with the instrument or separately?
NIST-traceable calibration certificates are delivered with the equipment as part of the order package, not as a follow-up request after the fact.
▪Can you help us stay ahead of recalibration deadlines?
Yes. Calibration due dates ride on the equipment record you receive at handover, so recertification lands on the calendar as routine maintenance instead of surfacing as a finding during an audit.
▪Do you supply lab IT alongside test instruments, or only the instruments?
Both. Data acquisition systems, networked instrumentation and secure storage for sensitive test data are scoped and integrated alongside the instrumentation itself.
▪Can you sequence delivery around our lab build-out?
Yes. For new or expanding facilities we schedule instrument delivery and lab-IT stand-up against your construction or fit-out timeline, so calibration-sensitive equipment isn't received into an uncontrolled space before it's ready. The goal is a bench you can commission on arrival.
▪Do you handle test data with controlled-handling requirements?
The lab IT we integrate — data acquisition, networked instrumentation and storage — can be specified for controlled-unclassified or export-sensitive test data, with segmentation and access sized to the handling requirement. The data plane is scoped to face the same review as the physical bench.
