Uniqcli

Best TAA-Designated Fiber Patch Cables

The pre-terminated fiber jumper that links a switch to an SFP, a patch panel to a transceiver or an MPO trunk to a breakout — read by connector pair, fiber mode, reach and whether the cable's own title carries the TAA designation.

TAA-compliant fiber jumpers in stock at Uniqcli

How to choose →

A curated selection with live pricing — in-stock lines first, then back-ordered lines with a typical lead time. Every line is sourced through US distribution and screened for NDAA §889 status before checkout, with TAA verified on request.

OM4 LC-LC, riser

AddOn

AddOn 4m LC to LC Orange OM4 Duplex OFNR (Riser-Rated) TAA Fiber Patch…

ADD-LC-LC-4M5OM4-OE-TAA

A 4m LC-to-LC OM4 duplex OFNR (riser-rated) multimode jumper in orange, 50/125 — the everyday laser-optimized jumper for a 10G/40G/100G switch-to-SFP hop inside a row.

Titled TAA Compliant, which is a per-part fact to confirm on the row you order.

$29.90Back-ordered
View details →

OM4 LC-LC, plenum

AddOn

AddOn 2m LC to LC Aqua OM4 Duplex OFNP (Plenum-Rated) TAA MMF…

ADD-LC-LC-2M5OM4P-TAA

A 2m LC-to-LC OM4 duplex OFNP (plenum-rated) multimode jumper in aqua, 50/125 — the same 10G/40G/100G jumper with the plenum jacket a shared-air return requires.

Titled TAA Compliant. OFNP is the rating a plenum ceiling calls for; match it to the pathway.

$61.64Back-ordered
View details →

OM3 LC-LC, aqua

Legrand

C2G 1m LC-LC 10Gb 50/125 OM3 Duplex Multimode Fiber Optic Cable…

11000

A C2G 1m LC-LC 10Gb 50/125 OM3 duplex multimode jumper in aqua — the short laser-optimized cord for a 10G link on a legacy or mixed OM3 plant.

Titled TAA Compliant.

$48.81Back-ordered
View details →

OM4 LC-SC, 1m

Axiom Memory Solutions

Axiom LC/SC Multimode Duplex OM4 50/125 Fiber Optic Cable 1m

AXG94399

An Axiom LC/SC OM4 50/125 multimode duplex jumper, 1m — the crossover cord for an OM4 link that lands LC on the optic and SC on an older panel.

Titled TAA Compliant.

$38.54In stock
View details →

OM3 LC-SC, 10G

Axiom Memory Solutions

LC/SC 10G Multimode Duplex OM3 50/125 Fiber Optic Cable 1m

AXG92741

An Axiom LC/SC 10G multimode duplex OM3 50/125 jumper, 1m — a short OM3 crossover for a 10G port that meets an SC panel leg.

Titled TAA Compliant.

$33.91In stock
View details →

OM4 LC-LC, 0.5m

Axiom Memory Solutions

Axiom LC/LC Multimode Duplex OM4 50/125 Fiber Optic Cable 0.5m

AXG95567

An Axiom LC/LC OM4 50/125 multimode duplex jumper, 0.5m — the very short OM4 cross-connect for a dense in-rack patch field.

Titled TAA Compliant.

$54.95In stock
View details →

OM1 LC-LC, 62.5

C2G

C2G-2m LC-LC 62.5/125 OM1 Duplex Multimode Fiber Optic Cable…

11103

A C2G 2m LC-LC 62.5/125 OM1 duplex multimode jumper in orange — the legacy-grade cord for an existing OM1 plant that has not been re-fibered.

Titled TAA Compliant. OM1 is a legacy multimode grade; match it to the existing 62.5 plant, not a new 10G design.

$24.50Back-ordered
View details →

OM4 SC-LC, ENET

NSI Industries

TAA Compliant ENET 3M SC/LC Duplex Multimode 50/125 10Gb OM4 or Better…

SCLC-OM4-3M-ENT

An ENET 3m SC/LC OM4 or better 50/125 10G aqua duplex multimode jumper — an individually-tested crossover for a 10G link between an SC panel and an LC optic.

Titled TAA Compliant.

$34.19Back-ordered
View details →

OM3 ST-LC, ENET

NSI Industries

ENET 2M ST/LC OM3 50/125 10G Aqua Duplex Multimode Fiber Patch Cable 2…

STLC-10G-2M-ENT

An ENET 2m ST/LC OM3 50/125 10G aqua duplex multimode jumper — the crossover for a link that lands the older ST bayonet connector on one end and LC on the other.

Titled TAA Compliant.

$44.66Back-ordered
View details →

OM1 LC-LC, Tripp Lite

Eaton

Tripp Lite series Duplex Multimode 62.5/125 Fiber Patch Cable (LC/LC)…

N320-06M-BL

A Tripp Lite by Eaton 6M LC/LC 62.5/125 multimode duplex OFNR/LSZH jumper — a longer legacy-grade cord for an OM1 run that reaches across a rack row.

Titled TAA Compliant.

Request pricing
View details →

OS2 LC-LC single-mode

Axiom Memory Solutions

LC/LC Singlemode Duplex OS2 9/125 Fiber Optic Cable 1m

AXG92701

An Axiom LC/LC single-mode duplex OS2 9/125 jumper, 1m — the long-reach cord for a single-mode spine or campus backbone link that runs single-mode optics.

Titled TAA Compliant. Single-mode does not interoperate with multimode; match it to a single-mode transceiver.

$36.99In stock
View details →

OS2 LC-LC, LSZH

AddOn

AddOn 3m LC to LC Yellow OS2 Duplex LSZH TAA SMF Fiber Patch Cable

ADD-LC-LC-3M9SMFLZ-TAA

A 3m LC-to-LC OS2 duplex LSZH single-mode jumper in yellow, 9/125 — a long-reach cord with the low-smoke jacket an occupied space specifies.

Titled TAA Compliant.

$19.78Back-ordered
View details →

MPO OM4 12-strand

AddOn

AddOn 2m MPO/UPC to MPO/UPC Aqua OM4 OFNR (Riser-Rated) 12-Strand TAA…

ADD-MPOMPO-2M5OM4-TAA

A 2m MPO/UPC to MPO/UPC OM4 OFNR 12-strand multimode trunk in aqua, 50/125 — the multi-fiber jumper that carries a 40G/100G trunk between cassettes rather than a single duplex link.

Titled TAA Compliant. MPO trunks feed breakout cassettes; it is not a device-to-optic patch cord.

$98.90Back-ordered
View details →

More network cables in the Uniqcli catalog

See all 62,108 network cables

More from across this category. In-stock lines lead, and a back-ordered line carries the same estimated availability its product page does — with live pricing throughout, NDAA §889 screening before checkout and TAA verified on request.

Need pricing on TAA-compliant fiber jumpers?

Tell us where to reach you and a Uniqcli specialist will follow up by email with current pricing, availability and lead time for the quantities you need — including parts that aren’t shown on this page.

Buying for an organization or for yourself — both work. No payment up front.

Messaging frequency may vary. Message and data rates may apply. You can opt out at any time by texting STOP. For assistance, text HELP or visit our website at https://getuniqcli.com/. Visit getuniqcli.com/legal/privacy for our Privacy Policy and getuniqcli.com/legal/terms for our Terms of Service.

Do not submit classified information, CUI, restricted FCI, export-controlled technical data, protected health information, payment-card data, passwords, or private keys through this form. Contact your Uniqcli representative or to request an approved channel.

Or send it through the quote desk

A fiber patch cable is the short, factory-terminated jumper that finishes an optical link — the LC pair from a switch port to a transceiver, the SC leg into a legacy panel, the MPO trunk that feeds a breakout cassette. The permanent fiber in the wall is pulled and spliced once; the jumper is the consumable that is bought by the box, handled, unplugged and replaced, and on a federal or federally-funded order it is the item a contracting officer reads a country-of-origin designation on. Choosing it well is mostly about matching the connector pair and the fiber mode to the equipment, getting the reach honest, and then confirming the origin designation on the exact part number — because the designation is a per-part fact, not a property of the brand.

Three choices sit on the row. Fiber mode is first and it is set by the optics: OM3 and OM4 are laser-optimized multimode for short-reach 10G/40G/100G inside a building or a row, while OS2 single-mode carries long reach and is what campus backbones and most modern data-center spines run — a jumper's mode has to match the transceiver at both ends, because multimode and single-mode do not interoperate. Connector pair is second: LC is the dominant duplex connector on today's SFP/SFP+/QSFP optics, SC still appears on older panels and some transport gear, and MPO/MTP is the multi-fiber connector that trunks 8, 12 or more strands for 40G/100G and fans out to LC. Reach is third and it is where slack goes to die: an over-long jumper is neater in a small tray and a bend-radius problem in a dense one, so jumpers are bought at the length the ports actually are.

Nothing on this page is a test result. The grid is fenced to connector-cable rows whose own manufacturer title carries the TAA designation, and the fiber jumpers are pinned to the front; the editorial picks below span OM1 through OM4 multimode and OS1/OS2 single-mode, LC, SC, ST and MPO connectors, short jumpers to longer runs — each one checked by hand for the designation in the vendor's own catalog title. Cards carry live pricing and current availability from the catalog; the origin designation is confirmed per part number on the quote.

Buyer's checklist

How to choose a TAA-compliant fiber patch cable

  • Match the fiber mode to the optics. OM3 and OM4 are laser-optimized multimode for short reach (10G/40G/100G inside a building); OS2 is single-mode for long reach and most data-center spines. A jumper's mode must match the transceiver at both ends — multimode and single-mode do not interoperate.
  • Match the connector pair to the equipment. LC is the duplex connector on nearly all current SFP/SFP+/QSFP optics; SC appears on older panels and transport gear; MPO/MTP trunks 8–12+ strands for 40G/100G and fans out to LC through a cassette. Order the pair the two ends actually present.
  • Buy the reach the ports actually are. An over-long jumper is neater in a small tray and a bend-radius problem in a dense one; standardise a handful of stocked lengths and colour-code by service rather than coiling one long cord.
  • Read the jacket rating for the space. OFNR/riser is the default for a vertical backbone; OFNP/plenum is required in a shared-air return; LSZH is the low-smoke jacket many facilities specify — the picks name their rating in the vendor's own title.
  • Colour-code by mode and service. Aqua is the industry cue for OM3/OM4, yellow for OS2 single-mode; several of the picks below are stocked in multiple colours so a floor can code its jumpers by service without changing the part.
  • Where the purchase order names TAA, read the designation on the part number. Several of these cables carry TAA Compliant in the manufacturer's own title and others in the same family do not — it is a per-part fact to confirm on the exact row you order, not a property of the brand.
  • Standardise the site on one scheme. One mode per link, one connector convention and one colour map keeps the spare box small and the moves-and-changes fast; the mistake is not the wrong choice, it is three different choices feeding one row of optics.

OM3, OM4, OS2: match the jumper to the optics, not the wish

A patch cable is part of the optical channel, so its fiber mode has to match the transceiver it plugs into — multimode and single-mode are different glass and do not interoperate, and an OM4 aqua jumper into a single-mode SFP simply does not light. The honest rule is to read the optic first: laser-optimized multimode (OM3, OM4) for the short 10G/40G/100G reaches inside a building or a row, and OS2 single-mode for the long campus and data-center spine reaches. Over-buying the grade of the glass does not extend a reach the optics cannot drive, and mismatching the mode caps a link that would otherwise work.

The connector and the jacket are the other half. LC duplex is the connector on nearly all current SFP/SFP+/QSFP optics; SC still lands on older panels and some transport gear; and MPO/MTP is the multi-fiber connector that trunks 8, 12 or more strands for 40G/100G and fans out to LC through a cassette. Jacket rating follows the space it runs through — OFNR riser for a backbone, OFNP plenum for a shared-air return, LSZH where the facility specifies low-smoke — and those are per-part facts the manufacturer's title states, which is why two jumpers of the same mode are not interchangeable in every position.

TAA on the part number, confirmed on the quote

The Trade Agreements Act turns on where a good is manufactured or substantially transformed, and for a fiber patch cable that is a fact about the specific part number rather than about the manufacturer. Several of the cables on this page carry TAA Compliant in the vendor's own catalog title, and others in the same family do not, so the designation is read per part and confirmed on the exact row you order. A manufacturer's designation is its own statement about that part number, not an independent certification, which is why the picks below were chosen on the designation in the vendor's own title rather than on the brand.

Uniqcli sources every line through US distribution and screens TAA country-of-origin and NDAA §889 status before checkout, with the documentation tied to the specific part number rather than a product family. That is what lets a full optical order — the jumpers, the transceivers, the cassettes, the fiber panel and the enclosure behind them — be quoted, screened and shipped on one document, so the smallest parts and the install date stay on the same page.

Related reading

Keep exploring

TAA-designated countriesBest single-mode fiber patch cablesBest fiber enclosures and patch panelsBest TAA-compliant SFP and QSFP transceiversBest TAA-designated Ethernet patch cablesStructured cabling services

FAQ

Common questions

What is the difference between OM3, OM4 and OS2 fiber patch cables?
The glass and the reach. OM3 and OM4 are laser-optimized multimode fiber for short reaches — 10G, 40G and 100G inside a building or a data-center row — with OM4 carrying those speeds a little farther than OM3. OS2 is single-mode fiber for long reach: campus backbones and most modern data-center spines. A jumper's mode has to match the transceiver at both ends, because multimode and single-mode use different optics and do not interoperate, so the rule is to read the optic first and then buy the jumper that matches it.
LC, SC or MPO — which connector do I need?
Read the equipment. LC is the small duplex connector on nearly all current SFP, SFP+ and QSFP optics, so most switch-to-transceiver jumpers are LC-LC. SC is a larger connector still found on older patch panels and some transport gear, which is why LC-SC and SC-SC jumpers exist. MPO (also called MTP) is the multi-fiber connector that trunks 8, 12 or more strands at once for 40G and 100G links and fans out to LC through a breakout cassette. Order the connector pair the two ends actually present rather than a single default.
What jacket rating do I need — riser, plenum or LSZH?
It follows the space the cable runs through. OFNR (riser) is the default for a vertical backbone or a general pathway; OFNP (plenum) is required where the cable runs through a shared-air return or plenum ceiling; and LSZH is a low-smoke, zero-halogen jacket many facilities and international sites specify for occupied spaces. The picks below name their rating in the manufacturer's own title, so match the rating to the pathway and to the local code rather than treating all jumpers as interchangeable.
Are these fiber patch cables TAA compliant?
Some of them are, and it is stated per part rather than per brand. Several rows here carry TAA Compliant in the manufacturer's own catalog title, and others do not, including jumpers from the same manufacturer sitting beside each other in the same colour and length range. Where an order carries an origin clause, read the designation on the exact part number you are ordering and confirm it on the quote; a manufacturer's designation is its own statement about that part number, not an independent certification and not a property of the product family.
Can business, government and education buyers order these?
Every line Uniqcli quotes is sourced through US distribution and screened for TAA country-of-origin and NDAA §889 status before checkout — with documentation tied to the specific part number, not a product family.
Ask AI about Uniqcli

“Best fleet docking station”

Need TAA-compliant fiber jumpers pricing?

Send a bill of materials or part numbers — we confirm stock and a below-market total, with TAA verified on request. No payment up front.

Get a quoteBrowse all network cables