IOGEAR Extra Receiver for GVE4K60KIT-4K Video Extender over Ethernet

Extend Video Transmission up to 10 Displays

The GVE4K60RX is additional receiver that can be added to the GVE4K60RX (click here for more details about the kit) to allow additional displays to share the same content. Up to nine additional GVE4K60RX receivers can be added to a single GVE4K60RX in cascading fashion, allowing a total of ten displays-a perfect multi-screen digital display solution for hospitality, restaurants, houses of worship, or anywhere multiple displays are needed.

More from the Manufacturer

4K HDMI® Video Extender/Splitter Over Ethernet Receiver

The GVE4K60RX is additional receiver that can be added to the

GVE4K60KIT

(click here for more details about the kit) to allow additional displays to share the same content. Up to nine additional GVE4K60RX receivers can be added to a single GVE4K60KIT in cascading fashion, allowing a total of ten displays-a perfect multi-screen digital display solution for hospitality, restaurants, houses of worship, or anywhere multiple displays are needed.

Extend or Split Video Transmission over Cat 6

IOGEARs 4K Video Extender/Splitter Over CAT 6 Kit is the perfect choice for users who wish to extend or split video over longer lengths than HDMI® cables can handle without video degradation issues. HDMI cables max out at 50 ft, while CAT 6 can extend to 230 ft (165 ft between receivers). CAT 6 cables are more efficient to run through walls, attics and crawl spaces. And, CAT 6 cables are 60% less expensive than HDMI cables and are less likely to fail over time.

Features

Extra receiver for GVE4K60KIT allows adding up to 10 receivers to a single transmitter for multi-display systems

Resolutions up to 4096 x 2160 @30Hz or 3840 x 2160 @60Hz. (4:4:4) with HDR support

Near zero latency (1ms) allows use for gaming or other low latency dependent uses

ARC support and EDID support

Supported audio: LPCM, DTS-HD, DTS, Dolby TrueHD 7.1, Dolby Digital 5.1

S/PDIF connection for external digital audioRange of 230 feet to the first receiver and 165 feet between all cascading receivers

Bi-Directional IR (source can be controlled from the display side and display can be controlled from the source side)

Built-in protection against lightning, electrical surge and electrostatic shock

Aluminum housing

Range First Receiver 165 ft Cascading

Ultra-High Definition Support Up to 4K @30Hz

High Dynamic Range Support

Near-Zero Latency

Extender Mode VS Splitter Mode

Extender Mode: The major benefit of this mode is it allows you to extend the distance between two devices without loss of video quality. For example, you want to view a film on a Blu-ray player but in a different room--extender mode makes this connection possible.

Splitter Mode: The major benefit of this mode is taking one source video and playing it on many receiving screens. For example, in an office/store setting, you have multiple monitors that need to play the same video and are rather far in distance from each other. Cascade up to 10 display devices with 10 receivers.

4K Video Quality

Enjoy cinema-quality video. This 4K extender kit transmits resolutions up to 4096 x 2160 @30Hz or 3840 x 2160 @60Hz (4:4:4) with 18 Gbps bandwidth, with close to zero latency.

Superior Audio Quality

IOGEAR's 4K Video Extender/Splitter Kit includes the S/PDIF port to support LPCM, DTS-HD®, DTS®, Dolby® TrueHD 7.1, Dolby® Digital 5.1 audio formats. With the flip of a switch, select ARC for returning audio from compatible displays. An HDMI loop-out allows an additional display to be connected on the transmitter side.