Uniqcli

Best Perle Media Converters for Fiber Network Deployments

SFP-based, PoE/PoE+, long-haul single-mode, and 10 GbE copper-to-fiber media converters — with in-stock status shown on each.

Perle media converters in stock at Uniqcli

How to choose →

A curated selection with live pricing — in-stock lines first, then back-ordered lines with a typical lead time. Every line is sourced through authorized distribution and screened for TAA country-of-origin and NDAA §889 status before checkout.

More transceivers and media converters in the Uniqcli catalog

See all 3,312 transceivers and media converters

More Perle first — closest to what you were just looking at; “See all transceivers and media converters” above opens every other brand in the category. In-stock lines lead, and a back-ordered line carries the same estimated availability its product page does — with live pricing throughout and the same TAA country-of-origin and NDAA §889 screening before checkout.

Need pricing on Perle media converters?

Tell us where to reach you and a Uniqcli specialist will follow up by email with current pricing, availability and lead time for the quantities you need — including parts that aren’t shown on this page.

Buying for an organization or for yourself — both work. No payment up front.

Do not submit classified information, CUI, restricted FCI, export-controlled technical data, protected health information, payment-card data, passwords, or private keys through this form. Contact your Uniqcli representative or to request an approved channel.

Or send it through the quote desk

Media converters bridge copper Ethernet to fiber where distance, electrical isolation, or an existing fiber plant rules out a straight RJ-45 run. Perle's line covers the common cases a network or field team meets: standalone 10/100/1000Base-T copper-to-fiber units, SFP-slot models that take field-swappable optics, PoE and PoE+ variants that carry power to a far-end camera or access point, long-haul single-mode designs reaching up to roughly 160 km on 1550 nm optics, and 10 Gigabit units with pluggable slots for higher-capacity backbones.

Start from the link, not the box. Confirm the fiber type — multimode for short in-building hops, single-mode for campus and long-haul spans — along with the wavelength and the connector (ST, SC, or LC) against what is already in the ground. Decide whether you want fixed-fiber simplicity or SFP-based flexibility, whether the far end needs power over the same converter, and whether you need remote visibility: protocol-transparent standalone units are fine for a set point-to-point link, while IP-managed models add diagnostics, link-fault pass-through, and SNMP for spans you cannot easily reach. Extended-temperature (-XT) and rail-mount hardware matter for cabinets, plant floors, and roadside enclosures.

The models below are the Perle transceivers and media converters Uniqcli stocks, with live in-stock status shown on each so you can tell what ships now from what is back-ordered. Every part is sourced through authorized distribution and screened for TAA country-of-origin and NDAA 889 status before checkout, with documentation tied to the specific part number — useful when a fiber build has to clear procurement review for business or government buyers.

Buyer's checklist

How to choose a Perle media converter

  • Match the fiber and distance first: multimode for short in-building runs, single-mode for campus and long-haul links up to roughly 160 km on 1550 nm optics — then confirm wavelength and connector (ST, SC, or LC) against the existing plant.
  • Choose fixed-fiber or SFP-based: SFP-slot converters let you swap optics in the field as distance or wavelength needs change; fixed-connector units are simpler where the link is settled.
  • Check copper-side speed and power: look for 10/100/1000Base-T auto-negotiation, and PoE or PoE+ pass-through if the converter has to power a downstream camera, access point, or phone.
  • Decide managed vs unmanaged: protocol-transparent standalone units suit simple point-to-point extension; IP-managed models add remote diagnostics, link-fault pass-through, and SNMP for links you cannot physically reach.
  • Plan for the environment: standard versus extended-temperature (-XT) hardware, and rail, rack, wall, or desktop mounting to fit the cabinet or enclosure.
  • Confirm sourcing and compliance: every unit is sourced through authorized distribution and screened for TAA and NDAA 889 status, with documentation tied to the part number.

Where these fit

Media converters appear wherever copper has to become fiber. Campus and building-riser links use them to cross distances a copper run cannot; physical-security projects put a powered converter beside a far-end camera or access point so one fiber carries both data and power; and utility, transportation, and plant sites rely on hardened, rail-mount units riding out heat and cold in cabinets no HVAC reaches. Roadside and intelligent-transportation enclosures use them to touch equipment sitting well beyond copper's hundred-meter ceiling, and single-mode long-haul models tie outlying buildings back to a core over fiber already in the ground.

Planning a fiber deployment

Past a handful of links, plan for density and reach rather than counting boxes. A managed module chassis folds many converters into one powered, remotely visible frame — a better fit for a wiring closet or data-center row than a shelf of loose standalone units, which stay right for isolated point-to-point spans. Before committing an optic, budget the actual span: fiber attenuation, splice and connector loss against the optic's rated distance, with margin for aging. Keeping a few spare converters and pluggable optics on the shelf turns a failure into a swap instead of an outage.

Total cost of ownership

Media converters draw little power and mostly sit passive, so their real cost is set by where they live and how hard they are to reach. An IP-managed unit costs more up front but earns it back on spans you can't casually visit — link-fault pass-through and SNMP turn a would-be site trip into a remote check and cut truck rolls. Hardened hardware avoids the premature failures unconditioned cabinets cause, and standardizing on SFP-based frames lets you carry optics forward as a link's distance or wavelength changes instead of buying a new converter each time.

FAQ

Common questions

What's the difference between an SFP-based and a fixed-fiber Perle media converter?
A fixed-fiber unit has the optics built in, so its wavelength, connector, and distance are set — simple to deploy where the link won't change. An SFP-based unit has an open slot that accepts a pluggable optic, so you can match multimode or single-mode and short- or long-reach, then swap it later without replacing the converter. Field teams that standardize on one chassis often prefer SFP models for that flexibility.
Can a Perle media converter deliver PoE to the device at the far end?
Several models in the line carry PoE or PoE+ on the copper side, so the converter can power a downstream camera, wireless access point, or IP phone over the same cable that carries data. Check the specific model's power budget and whether it is PoE or PoE+, and confirm the far-end device's draw fits within it.
How far can a Perle single-mode media converter reach?
It depends on the optic and the fiber. The long-haul single-mode models here are rated for spans up to roughly 160 km on 1550 nm optics; shorter single-mode and multimode variants cover campus and in-building distances. Actual reach depends on fiber quality, splices, and connector loss, so budget the link accordingly.
Are these Perle media converters available to government and education buyers?
Yes. These media converters are available to business, government, and education buyers. Each part is sourced through authorized distribution and screened for TAA country-of-origin and NDAA 889 status before checkout, with the compliance documentation tied to the specific part number so it can clear procurement review. Reach out if you need a formal quote or specific paperwork for your buying process.
Ask AI about Uniqcli

“Best barcode scanners”

Need Perle media converters pricing?

Send a bill of materials or part numbers — we confirm stock, TAA country of origin and a below-market total. No payment up front.

Get a quoteBrowse the Perle catalog