Uniqcli

Best Legrand Projection Screens for Conference Rooms and Briefing Spaces

Electric and tensioned screens across the Da-Lite Wireline Advantage, Studio Electrol, and Tensioned Electrol lines — recessed-ceiling and wall/ceiling mounts in 16:9, 16:10, and 2.35:1.

Legrand projection screens in stock at Uniqcli

How to choose →

A curated selection with live pricing — in-stock lines first, then back-ordered lines with a typical lead time. Every line is sourced through authorized distribution and screened for TAA country-of-origin and NDAA §889 status before checkout.

More projection screens in the Uniqcli catalog

See all 767 projection screens

More Legrand first — closest to what you were just looking at; “See all projection screens” above opens every other brand in the category. In-stock lines lead, and a back-ordered line carries the same estimated availability its product page does — with live pricing throughout and the same TAA country-of-origin and NDAA §889 screening before checkout.

Need pricing on Legrand projection screens?

Tell us where to reach you and a Uniqcli specialist will follow up by email with current pricing, availability and lead time for the quantities you need — including parts that aren’t shown on this page.

Buying for an organization or for yourself — both work. No payment up front.

Do not submit classified information, CUI, restricted FCI, export-controlled technical data, protected health information, payment-card data, passwords, or private keys through this form. Contact your Uniqcli representative or to request an approved channel.

Or send it through the quote desk

Legrand's projection screens, carried under the Da-Lite line, cover the range most fixed-install AV projects actually need: motorized screens that drop from a recessed ceiling housing, wall- or ceiling-mounted electric models, and large-format tensioned systems built to hold a flat, wrinkle-free surface at wide aspect ratios. In this catalog they run from compact recessed units suited to a single conference room up to Studio Electrol and Large Advantage Deluxe Electrol systems sized for auditoriums and briefing theaters.

The practical decisions come down to viewing surface, aspect ratio, and mounting method. Surfaces here include HD Progressive (0.9 and 1.1 gain), Matte White, Parallax Stratos ambient-light-rejecting material, Da-Mat, High Contrast Cinema Vision, and Dual Vision for rear projection — each matched to a room's ambient light and projector output. Aspect ratios span 16:9, 16:10, and cinematic 2.35:1, and mounts range from recessed/in-ceiling to wall/ceiling and dedicated ceiling brackets. Tensioned models add side and bottom tab tensioning to keep large surfaces flat for edge-to-edge focus.

This guide reflects the Legrand projection screens Uniqcli stocks through authorized distribution, with live in-stock status shown on each product page so you can see what is available now versus what ships to order. Because screen dimensions, drop, and housing depth are fixed at purchase, confirm the throw geometry and ceiling structure before ordering — the criteria below outline what to verify.

Buyer's checklist

How to choose a Legrand projection screen

  • Size the diagonal and aspect ratio to your projector and room: match 16:9, 16:10, or 2.35:1 to the source content, and confirm image height against seating distance and any ceiling or podium sightline obstructions.
  • Pick the viewing surface for your ambient light: Matte White and HD Progressive suit controlled-light rooms, while Parallax Stratos and High Contrast surfaces are built to preserve contrast where lighting cannot be fully dimmed.
  • Choose the mounting method against the actual structure: recessed/in-ceiling models need verified plenum depth and housing clearance, while wall/ceiling electric units need solid backing and cable routing to the drop point.
  • For large-format screens, specify a tensioned model to hold the surface flat — untensioned material can wave at wide widths and soften focus toward the edges.
  • Plan control and power early: electric screens need line voltage at the housing and a trigger, wall switch, or control-system integration, so coordinate low-voltage runs with the install.
  • Verify shipping and lead time from the live in-stock status, since large tensioned and Electrol screens are frequently built to order rather than shelf-stocked.

Where these screens fit

Room geometry, not model name, should lead the screen choice. In a single conference or huddle room a recessed ceiling unit keeps the ceiling line clean and the image modest; a training or mid-size meeting room wants enough image height that the back row reads a spreadsheet cell without squinting, which ties diagonal to seating depth. Briefing theaters and command spaces push toward large tensioned surfaces where flatness carries detail to the far seats, and rooms wrapped in glass or daylight are where an ambient-light-rejecting surface earns its premium.

Planning the install

A fixed-install screen is a construction item as much as an AV product, so bring it into the drawings early. Recessed housings depend on verified plenum depth and clearance and are far easier to frame in before the ceiling closes; surface-mounted units need solid structural backing and a mounting height set against sightlines and any podium or light fixtures below. Because electric screens need line voltage at the housing plus a control tie-in, sequence those runs with the electrician and integrator during rough-in rather than chasing them through a finished wall.

Total cost of ownership over the room's life

A fixed screen routinely outlives several projector refreshes, so its value shows up in durability and clean integration rather than the purchase figure. Spec the motor and screen class for the room's real duty cycle — a briefing space that runs all day works the mechanism far harder than an occasional boardroom. Budget the integration labor and control wiring alongside the screen, keep the surface matched to the projector's brightness and throw so a mismatch doesn't waste image quality, and follow the maker's cleaning guidance to protect the surface across its long service life.

FAQ

Common questions

What is the difference between a tensioned and non-tensioned electric screen?
A tensioned screen uses side and bottom tab tensioning to pull the viewing surface flat, which keeps large images uniform for edge-to-edge focus. Non-tensioned electric screens are lighter and cost less, and are a good fit for smaller rooms where minor surface curvature is not a concern. As screen width grows, tensioned models like the Da-Lite Tensioned Advantage and Large Advantage Deluxe Electrol become the safer choice.
How do I choose the right viewing surface?
Match the surface to the room's ambient light and the projector. Matte White and HD Progressive surfaces render accurate color in rooms you can dim, while ambient-light-rejecting materials such as Parallax Stratos and High Contrast Cinema Vision preserve contrast where lights stay on. Rear-projection setups use a surface like Dual Vision. Gain figures (for example 0.9 or 1.1) describe reflectivity and viewing angle tradeoffs.
Are these screens available in recessed and wall-mount versions?
Yes. The Legrand screens in this catalog include recessed/in-ceiling models that hide the housing above the ceiling line, plus wall/ceiling and dedicated ceiling-mount electric units. Confirm plenum depth and housing clearance for recessed installs, and solid structural backing plus power and control routing for surface-mounted models, before ordering — screen dimensions and drop are fixed at purchase.
How are these screens handled for TAA and NDAA compliance?
Uniqcli serves business, government, and education buyers, and these Legrand projection screens are sourced through authorized distribution and screened for TAA country-of-origin and NDAA 889 status before checkout, with documentation tied to the specific part number. Compliance is confirmed per part number rather than assumed, so your procurement and contracting teams receive the sourcing detail for the exact model ordered.
Ask AI about Uniqcli

“Best monitors for a workforce”

Need Legrand projection screens pricing?

Send a bill of materials or part numbers — we confirm stock, TAA country of origin and a below-market total. No payment up front.

Get a quoteBrowse the Legrand catalog