Find a lens-distance range from image width and a documented throw-ratio range.
AV & workplace
Projector throw and image size
Find a lens-distance range from image width and a documented throw-ratio range.
Example inputs · Replace these with your measurements to build your plan.
Method, example and sources
Convert the active diagonal and aspect ratio to image width and height.
Multiply image width by the minimum and maximum documented throw ratios.
Compare the measured optical-reference distance with that range.
Use the exact mounting table for UST or special lenses and validate surface, brightness and installation separately.
Worked example. A 100-inch 16:9 image is about 2.214 m wide. A 1.2–1.5 throw range gives about 2.657–3.321 m from the lens reference to the image, so a 3 m optical distance is inside that geometric range.
The entered lens distance is inside the geometric range
Use the exact projector/lens and its native image geometry. A geometric result is not a complete installation approval.
Image width
2.214m
Image height
1.245m
Near lens distance
2.657m
Far lens distance
3.321m
Required ratio at available distance
1.355
Near2.66 m
Available3 m
Far3.32 m
Measure from the optical reference defined by the OEM, not the back of the projector.
Brightness, surface, lens shift, mounting tolerances, aspect conversion and keystone loss require separate model evidence.
From the catalog
Projectors
Explore related listings, then confirm the exact model requirements against your plan. These listings are not an automatic compatibility or capacity verdict.
Throw ratio is based on image width, not diagonal. The aspect ratio first determines the active width and height, then the lens ratio gives an optical distance range. Zoom lenses can provide a range rather than one mounting point. Keeping those dimensions visible avoids a plausible-looking result calculated from the wrong diagonal or measurement reference.
Before choosing a product
Ultra-short-throw systems often need a model-specific installation diagram to relate the lens reference to the cabinet, wall and mount. Geometry alone does not establish enough brightness, a suitable surface, lens-shift clearance or acceptable keystone correction. Check the exact lens, native aspect, mounting tolerances and room conditions before ordering. Use the tool to narrow candidates, then retain the OEM installation evidence with the quote.
Worked example
A 100-inch 16:9 image is about 2.214 m wide. A 1.2–1.5 throw range gives about 2.657–3.321 m from the lens reference to the image, so a 3 m optical distance is inside that geometric range.