Uniqcli

Record fiber acceptance measurements

Compare entered bidirectional measurements with project limits and track inspection and test prerequisites.

Networking

Record fiber acceptance measurements

Compare entered bidirectional measurements with project limits and track inspection and test prerequisites.

Example inputs · Replace these with your measurements to build your plan.

Method, example and sources
  1. Choose whether the job requires loss testing alone or additional reflectometry.
  2. Enter both directions at each required wavelength using the project's limits.
  3. Compare the largest OTDR event when that method is part of the scope.
  4. Record inspection, reference and instrument checks alongside the numerical outcomes.

Worked example. Four entered loss readings below 2 dB do not complete a test record if inspection or the required reference has not been recorded.

Planning result · confirm model details

Some results or test prerequisites need attention

A record and comparison of entered measurements; this page does not perform or certify a test.

Measurements within limit
4of 4
Prerequisites recorded
2of 3
Largest entered insertion loss
1.4dB
Record fiber acceptance measurements: detailed result
Measurement / prerequisiteEnteredLimit / state
Wavelength 1 A→B1.22 dB · within
Wavelength 1 B→A1.42 dB · within
Wavelength 2 A→B1.12 dB · within
Wavelength 2 B→A1.32 dB · within
Inspection/cleaningNot recordedRequired in this worksheet
Test referenceRecordedRequired in this worksheet
Instrument/cord checkRecordedRequired in this worksheet
  • Record the actual wavelengths, standard, reference method, tester identity/calibration and saved test files with the job.
  • The entered limits come from the project specification; no universal certification threshold is assumed.

From the catalog

Test Equipment

Explore related listings, then confirm the exact model requirements against your plan. These listings are not an automatic compatibility or capacity verdict.

Different instruments answer different questions

An optical loss test measures the end-to-end path under a defined reference procedure. Reflectometry helps locate and characterize events along that path. The required test method, wavelengths, directions and limits come from the project and applicable standard. This worksheet compares readings you enter; it does not connect to an instrument, invent measurements or choose universal certification thresholds.

Keep the supporting test record

End-face condition, reference cords, adapters and instrument status can affect a test. Record those prerequisites and save the actual tester files with the job, including wavelength and direction labels. A numerical result within an entered limit is only one part of acceptance. Unrecorded inspection or a failed event needs attention even when other readings look acceptable; qualified testing remains necessary.

Worked example

Four entered loss readings below 2 dB do not complete a test record if inspection or the required reference has not been recorded.