Uniqcli
Tripp Lite by Eaton UPS TAA SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS 1U Rack/Vertical Network Card Options USB 6 Outlets
Eaton

Tripp Lite by Eaton UPS TAA SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS 1U Rack/Vertical Network Card Options USB 6 Outlets

1000 VA/800 W - 4 Minute Stand-by Time - 1U Rack/Tower - 6 x NEMA 5-15R - Surge, Black Out, Brownout, Over Voltage, Under Voltage, EMI / RFI - TAA Compliant

SKU
SM1000RM1UTAA
Category
General Purpose UPS

MSRP$1,476.80

$932.71

Save 37%

In stock: 257

Get a quote

Genuine Eaton through authorized distribution — TAA country-of-origin verified and NDAA §889 screened before checkout.

SKU
SM1000RM1UTAA
Category
General Purpose UPS

Overview

Protects Mission-Critical Rack-Mounted Equipment

• Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware

• Audible alarm signals loss of utility power, overload and low battery

• 6 NEMA 5-15R outlets

• 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input

• 450-joule surge suppression rating

Reliable Battery Backup

• Supports half load up to 14 min. and full load up to 4 min.

• Internal batteries designed for hot-swap field replacement

Switchable Outlets

• 2 load banks, each with one outlet controllable remotely to reboot equipment or shed nonessential loads

Automatic Voltage Regulation (AVR)

• Maintains 120V nominal output over input range of 83V-147V without using battery power

EMI/RFI Line Noise Filtering

• Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance

High Efficiency Operation

• 99% line mode efficiency saves money and energy and protects the environment

Optional Network Management Cards

• Compatible with Tripp Lite UPS management cards, such as WEBCARDLX

Communications Ports

• USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert

• EPO port supports emergency shutdown in large facilities

Versatile Installation Options

• Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack

• Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations

• Compatible with vertical mount cabinets

TAA Compliant

• Complies with Federal Trade Agreements Act (TAA) for GSA Schedule purchases

More from the Manufacturer

Power Protection and Battery Backup

Between severe weather, the aging electrical grid and unavoidable hazards lurking inside your own walls, your servers and network hardware are under constant attack from power problems. Prevent damage, downtime and data loss by installing this SmartPro UPS system. It conditions incoming AC power to protect your equipment, provides enough battery backup to outlast most outages and allows critical systems to shut down gracefully to prevent data loss and corruption during extended blackouts.

Common Applications

- Protect Servers and Network Hardware: Application Servers, Storage Servers, Database Servers, File Servers, Virtualization Servers, Proxy Servers, Web Servers, Media Servers, VoIP Servers, Network-Attached Storage, Network Switches, PoE Switches, Firewalls, Network Appliances, Bridges, Gateways, Routers.

- Protect Equipment with Active PFC Power Supplies: Active PFC power supplies found in many devices require pure sine wave power.

Pure Sine Wave Output

When operating from battery power, a UPS system generates the waveform of its AC output. Many UPS systems generate PWM sine wave power, an approximation of the pure sine wave power you receive from your electrical utility. Although PWM sine wave power is compatible with most equipment, pure sine wave power is required by some devices -- such as computers with active PFC power supplies -- and prevents others from overheating, malfunctioning or failing prematurely. This UPS system generates pure sine wave power for superior compatibility with active PFC power supplies and other sensitive equipment.

Reliable Battery Backup

- Half-Load Runtime: This UPS system will support a 50% load (400 W) for up to 14 minutes.

- Hot-Swappable Batteries: The internal batteries can be replaced without turning off the UPS system and disrupting the operation of connected equipment.

Advanced AVR and Surge/Noise Protection

In locations with chronic voltage problems, frequent switching to battery drains reserve power and shortens battery life. This UPS system has a feature called automatic voltage regulation (AVR) that solves the problem. The UPS detects when input voltage is out of bounds and corrects it without using the battery.

All Tripp Lite UPS systems also include built-in surge protection and noise filtering to shield your equipment from destructive transient voltages and electromagnetic (EMI/RFI) line noise.

Flexible Management Options

There are several ways to manage this UPS system:

1.Use the front-panel LEDs for convenient local management.

2.Use the USB port with your computer's built-in power management features.

3.Use the USB port with your computer's built-in power management features.

Use the USB or serial port with your computer and Tripp Lite's PowerAlert software.

4.Install an optional network card to enable standalone network management via SNMP, Web, SSH or telnet.

LED Control Panel

The intuitive multicolor LEDs display a variety of helpful and important information, including power status, voltage regulation status, connected load level, battery charge level and battery condition.

ROHS Design

- ENERGY STAR Certification: This UPS system has ENERGY STAR certification. It helps you save money, save energy and protect the environment by meeting strict efficiency guidelines set by the U.S. Environmental Protection Agency.

- User-Replaceable Battery: This UPS system has a user-replaceable, recyclable battery, allowing it to remain in service instead of going to a landfill.

- RoHS Compliance: This UPS system complies with the RoHS (Restriction of Hazardous Substances) Directive, limiting the use of hazardous substances in manufacturing.

Why Choose Tripp Lite?

Founded in 1922 in Chicago, Illinois, Tripp Lite is a leading manufacturer of products to power, protect, manage, house, cool, connect and mount your equipment. With a large selection of connectivity products, Tripp Lite has everything from USB hubs and reversible USB cables to fiber-optic cables and over Cat5e/Cat6 signal extenders. Whether you need to connect high-speed networks to switches, routers and servers in your data center, or send high-resolution video signals to displays and digital signs, Tripp Lite has the complete solution. Plus, before and after your purchase, our Chicago-based, in-house technical support specialists are available to assist you by phone, email and live chat. With over 90 years of quality products and service, Tripp Lite is a brand you can trust.

Warranty

Limited Warranty: 2 Year

About Eaton

Eaton is an intelligent power management company dedicated to improving the quality of life and protecting the environment for people everywhere. We are guided by our commitment to do business right, to operate sustainably and to help our customers manage power ─ today and well into the future. By capitalizing on the global growth trends of electrification and digitalization, we're accelerating the planet's transition to renewable energy and helping to solve the world's most urgent power management challenges.

Highlights

  • Corrects under- and overvoltages from 83V to 147V
  • 6 NEMA 5-15R outlets-2 switchable via network interface
  • Network power management and control capability
  • 99% efficiency rating saves energy and operating cost
  • 14 min. runtime at half load; 4 min. at full load
  • 2-year limited warranty, $250,000 Ultimate Lifetime Insurance

Specifications

Package Contents
  • SmartPro SM1000RM1UTAA 1000VA Tower/Rack Mountable UPS
  • Mounting hardware
  • Cabling for USB & DB9 Monitoring and EPO Switching
  • Instruction Manual
Software IncludedPowerAlert Monitoring
Product TypeLine-interactive UPS
Hot SwappableYes
Input Voltage120 V AC
Manufacturer Part NumberSM1000RM1UTAA
Limited Warranty2 Year
Output Voltage120 V AC
Weight (Approximate)32 lb
Form FactorRack/Tower
Status Indicators
  • Line power status
  • Battery power status
  • Overload status
  • Voltage regulation status
  • Battery low/replace status
Input Current9 A
ManufacturerEaton Corporation
Product ModelSM1000RM1UTAA
Product NameSmartPro SM1000RM1UTAA 1000VA Tower/Rack Mountable UPS
Product LineSmartPro
Surge Energy Rating450 J
Waveform TypeSine Wave
Rack Height1U
Brand NameTripp Lite series
Plug/Connector TypeNEMA 5-15P
AlarmLow Battery, Overload, Power Failure
Country of OriginTaiwan
Cord Length10 ft
Height1.70"
Width17.50"
Depth16.80"
Receptacle TypeNEMA 5-15R
Environmentally FriendlyYes
USBYes
Maximum Operating Temperature104°F (40°C)
Serial PortYes
Backup/Run Time (Half Load)14 Minute
Backup/Run Time (Full Load)4 Minute
Load Capacity (VA)1000 VA
Load Capacity (Watt)800 W
TAA CompliantYes
Receptacle Detail6 x NEMA 5-15R
Environmental ComplianceRestriction of Hazardous Substances (RoHS)

Downloads

Get a Eaton quote

Send a bill of materials or part numbers — we confirm stock, TAA country of origin and a below-market total. No payment up front.