Eaton Tripp Lite Series Portable AC Unit with Ionizer for Labs and Offices - 13,000 BTU (3.8 kW), 120V, R32 Refrigerant, Cable Lock Set, White

Portable air conditioner cools small server rooms and network closets or spot-cools a hot rack in a data center.

Features | Portable Close-Coupled Cooling with Upgrades for Better Performance

The upgraded SRCOOL12KWTE is a portable, compact, self-contained air conditioning unit designed for cooling overheated rack enclosures, IT-equipment hot spots and network closets without access to facility air conditioning. It can focus cool air through its flexible cooling duct or cool a small room through its louvered vent. It also filters and dehumidifies air to improve operating conditions and equipment reliability. An easy-to-read control panel with diagnostic LEDs provides convenient local management.

13,000 BTU of Cooling Power Protects Your Equipment Against Hazardous High Heat

This server rack cooling unit uses R32 refrigerant to pump 13,000 BTU (3.8kW) ASHRE; 9,000 BTU (2.64kW) SACC of cooling into your IT environment to help prevent shutdowns, malfunctions and other failures caused by overheating or fluctuating temperatures. R32 has a significantly lower global warming potential (GWP) compared to traditional refrigerants, which helps reduce the overall impact on climate change. Adopting R32 ensures compliance with current and upcoming regulations set by the U.S. Environmental Protection Agency (EPA), the State of California and Canada, as well as the latest standards for the Department of Energy (DoE), California Energy Commission (CEC) and Natural Resources Canada (NRCAN) for portable air-conditioning units, ensuring energy efficiency and compliance with the environmental standards.

Rack/Spot AC Unit Focuses Cold Air Where It's Most Needed

Close-coupled air conditioning delivers cold air near heat loads to discourage recirculation and increase energy efficiency as much as 34 percent. An included 71-inch flexible hose lets you aim the cold air to a specific spot, such as an overheated rack enclosure or an equipment hot spot. Hot air exits through a window or drop ceiling via an included exhaust kit. An upgraded hot air exhaust fan maintains effectiveness even under a high heat load. The unit also dehumidifies and filters the air, providing better air quality that can enhance operating conditions and equipment reliability.

Commercial-Grade Components for Reliable Performance

With a 100-percent duty cycle, the SRCOOL12KWTE can run continuously without costly downtime. It uses copper tubing that is stronger than the aluminum tubing used in most consumer cooling units. The copper allows higher pressures and better weld joints to stand up to the constant vibration of the running compressor.

Built-In Evaporator Ensures No Water Collection Tank to Empty

The evaporator expels the condensed water through the directional exhaust duct, eliminating the need for a drain tube, drain pan or water collection tank and saving you time and money. No external condenser, refrigerant piping or professional maintenance is required for simple operation. Upgraded firmware allows the compressor to cycle on and off while the evaporator fan stays on to prevent icing in high-humidity environments.

More from the Manufacturer

Portable close-coupled cooling with upgrades for better performance

The Eaton Tripp Lite series SRCOOL12KWTE is a portable, compact, self-contained air conditioning unit designed for cooling overheated rack enclosures, IT-equipment hot spots and network closets without access to facility air conditioning. It can focus cool air through its flexible cooling duct or cool a small room through its louvered vent. It also filters and dehumidifies air to improve operating conditions and equipment reliability.

13,000 BTU of cooling power

The SRCOOL12KWTE pumps 13,000 BTU (3.8kW) of cold air into a small server room or network closet. It can also be used for spot-cooling a hot rack in a data center.

- Can cool a small room with its louvered vent or focus cold air on a specific area through its flexible cooling duct.

- Also dehumidifies and filters the air, providing better air quality that can enhance operating conditions and equipment reliability.

Uses environmentally friendly R32 refrigerant

R32 has a significantly lower global warming potential (GWP) compared to traditional refrigerants, which helps reduce the overall impact on climate change.

- Complies with current and upcoming regulations set by the U.S. Environmental Protection Agency (EPA), the State of California and Canada, as well as the latest standards for the Department of Energy (DoE), California Energy Commission (CEC) and Natural Resources Canada (NRCAN).

Commercial-grade components for reliable performance

The SRCOOL12KWTE is constructed of top-quality materials for long life and durability. With a 100-percent duty cycle, this small but mighty cooling unit can run continuously with no downtime.

Uses copper tubing, which is stronger and easier to repair than the aluminum tubing used in most consumer cooling units.

Copper tubing allows for higher pressures and stronger weld joints, ensuring the SRCOOL12KWTE stands up to the constant vibration of the running compressor.

An upgraded hot air exhaust fan maintains effectiveness, even under a high heat load.

Plug-and-play installation and user-friendly operation

The SRCOOL12KWTE is designed for easy installation by almost anyone. Simply roll it into place on its built-in casters and plug it in. Its self-contained design requires no disruptive installation projects or costly service calls from HVAC specialists.

The 6 ft. power cord’s NEMA 5-15P plug with leakage protection connects to any standard AC outlet.

A built-in evaporator expels condensate through the unit’s directional exhaust duct, eliminating the need for a water collection tank and saving time and money on installation.

The unit is programmed to restart automatically after power failure, and a built-in timer allows unattended shutdown and startup.