Uniqcli
Eaton Tripp Lite Series SmartPro Medical-Grade UPS, Line Interactive, Lithium Battery, 6 Outlets - 230V, 700VA, 450W, Full Isolation
Eaton

Eaton Tripp Lite Series SmartPro Medical-Grade UPS, Line Interactive, Lithium Battery, 6 Outlets - 230V, 700VA, 450W, Full Isolation

700 VA/450 W - 220 V AC, 230 V AC, 240 V AC - 14.50 Minute Stand-by Time - Tower - 6 x IEC 60320 C13

SKU
SMX700HGL
Category
General Purpose UPS

MSRP$3,358.37

$2,121.08

Save 37%
Back ordered

Back ordered — ships when restocked.

Get a quote

Genuine Eaton through authorized distribution — TAA country-of-origin verified and NDAA §889 screened before checkout.

SKU
SMX700HGL
Category
General Purpose UPS

Overview

700VA/450W Medical-Grade UPS Allows Time to Back Up Critical Files During a Blackout

This 230V SmartPro® hospital-grade UPS is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, which makes it ideal for use in medical facilities, including patient care vicinities. It allows you to work through short power failures, and gives you enough time to safely save files and shut down your system in case of a prolonged blackout.

Long-Lasting LiFePhos Battery Handles up to 10,000 Cycles with Ease

This UPS system for hospitals contains a replaceable lithium iron phosphate (LiFePhos) internal battery that provides up to 30 times the cycle life of traditional sealed lead acid (SLA) batteries. The 6-outlet UPS system provides up to 42 minutes of battery backup at half load and 18 minutes at full load. During normal operation, incoming utility power keeps the replaceable internal battery fully charged, so backup power will always be available.

Automatic Voltage Regulation (AVR) Corrects Potentially Hazardous Voltage Fluctuations

AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. This UPS for medical equipment can correct brownouts as low as 155V and overvoltages as high as 274V back to nominal 230V power without drawing on the battery backup needed to support your equipment during a blackout.

Built-In Isolation Transformer Offers Full Isolation

The isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Cumulative leakage current of all connected equipment is less than 100 microamps.

Connect Your Equipment to 6 IEC 320 C13 Outlets

Six C13 hospital-grade outlets provide both battery backup and surge protector for your mobile medical equipment, such as computers, monitors and lab equipment. A 340-joule surge suppression rating protects connected components from the harmful effects of power surges.

Combats Electromagnetic Interference That Can Harm Equipment

Various electromagnetic and radio sources found in virtually every home and business can cause disruptive interference on the AC line. Known as EMI (electromagnetic interference) and RFI (radio frequency interference), this line noise is a common cause of performance problems and can lead to incremental hardware damage, data corruption and audio/video transmission problems. This medical-grade UPS system incorporates technology that filters out disruptive line noise so that it won't affect your equipment.

Easy-to-Read LEDs and Alarm Report Real-Time UPS and Power Status

Front-panel LED indicators monitor essential information, such as line power, battery power, overload, voltage regulation and battery low/replace status. An audible alarm will sound in case of low battery, excessive load and power failure.

Saves Your Files, Even When You're Away

USB and DB9 serial ports connect to your computer with the included cables. These ports communicate with Tripp Lite's free downloadable PowerAlert® software for safe, unattended system shutdown and file saves in the event of a prolonged power failure.

Tower Form Factor for Easy Placement on a Nurse's Station or Mobile Medical Cart

The long-lasting PVC housing fits easily on a desktop, shelf or anywhere else power is needed. The 15-centimeter (six-inch) dongle with hospital-grade C14 plug connects to a properly grounded AC wall outlet.

Warranty

Limited Warranty: 5 Year

About Eaton

Eaton is an intelligent power management company dedicated to improving the quality of life and protecting the environment for people everywhere. We are guided by our commitment to do business right, to operate sustainably and to help our customers manage power ─ today and well into the future. By capitalizing on the global growth trends of electrification and digitalization, we're accelerating the planet's transition to renewable energy and helping to solve the world's most urgent power management challenges.

Highlights

  • Lithium battery backup allows time to save files and safely shut down during blackouts
  • 6 C13 hospital-grade (HG) outlets provide power to medical equipment
  • UL 60601-1 compliant for use in patient care vicinities when plugged into HG wall outlet
  • Alarm and front-panel LEDs report online, battery, fault and overload conditions
  • 10,000-cycle LiFePhos battery lasts up to 30x longer than comparable SLA batteries
  • 5-year limited warranty

Specifications

Application/UsageMedical, Computer, Monitor, Lab Equipment
Package Contents
  • SmartPro SMX700HGL 700VA Tower UPS
  • USB Monitoring Cable, 1.8 m (6 ft.)
  • DB9 Serial Monitoring Cable, 1.8 m (6 ft.)
  • Owner's Manual
Product TypeLine-interactive UPS
Hot SwappableYes
Input Voltage230 V AC
Manufacturer Part NumberSMX700HGL
Limited Warranty5 Year
Output Voltage220 V AC, 230 V AC, 240 V AC
Weight (Approximate)42.10 lb
Form FactorTower
ManufacturerEaton Corporation
Product ModelSMX700HGL
Product NameSmartPro SMX700HGL 700VA Tower UPS
Product LineSmartPro
Waveform TypePulse-width Modulated Sine Wave
Product SeriesSMX
Brand NameTripp Lite series
Plug/Connector TypeIEC 60320 C14
Country of OriginChina
Height12.80"
Width7.50"
Depth9"
PhaseSingle Phase
Receptacle TypeIEC 60320 C13
Environmentally FriendlyYes
Backup/Run Time (Full Load)14.50 Minute
Load Capacity (VA)700 VA
Load Capacity (Watt)450 W
Typical Battery Recharge Time3.60 Hour
Receptacle Detail6 x IEC 60320 C13
Environmental ComplianceRestriction of Hazardous Substances (RoHS)

Downloads

Get a Eaton quote

Send a bill of materials or part numbers — we confirm stock, TAA country of origin and a below-market total. No payment up front.