Tripp Lite by Eaton Network Card for Select Tripp Lite by Eaton and Eaton UPS Systems and PDUs

The WEBCARDLXE is designed to fit specific Eaton Tripp Lite Series SmartPro and SmartOnline UPS systems only. Please verify its compatibility with your model before ordering. It is also backward-compatible with PDUs and UPS systems that currently support the WEBCARDLX management card.

Features | Allows Any Compatible UPS System to Function as a Managed Network Device

WEBCARDLXE turns a compatible UPS system into a managed device on your network. By inserting the network management card into an accessory slot and using an SNMP network management platform, web browser, SSH or Telnet, you can access, monitor, control and reboot the managed device from almost anywhere at any time. WEBCARDLXE's HTML5-based interface means Java isn't needed to interact with the mobile-friendly PowerAlert® Device Manager.

Remotely Monitor and Reboot Network Equipment from Anywhere 24/7

You can remotely monitor and log site electrical data, UPS self-tests, alerts and power events like blackouts, brownouts and overvoltage conditions. You can also reboot locked network equipment without an on-site visit or disruption of power to other loads (when used with controllable outlets or remotely switchable outlets on select devices).

Control Access and Stay Informed with Event Notifications

You can assign users different levels of access from full administrator to view-only operator. Multiple user support allows viewing by more than one user simultaneously. In addition, you can create an encrypted connection using your web browser's SSL setting. Based on your preferences, the WEBCARDLXE can notify you of events and power conditions with email messages or SNMP traps. It can also automatically shut down remote operating systems over your network. Real-time clock support maintains current day and date, even after a UPS shutdown.

Check Environmental Data with an Optional EnviroSense2

When connected to EnviroSense2 modules (sold separately), the WEBCARDLXE can control digital outputs and monitor temperature, humidity and contact closure state (features vary by module). Up to three EnviroSense2 modules may be daisy-chained together and mounted magnetically to your rack.

Save Time with Mass Configurations

PowerAlert Element Manager (PAEM) software consolidates different management utilities and simplifies the software-based maintenance of WEBCARDLXE. Its discovery engine identifies supported network solutions to concurrently apply a source configuration to multiple target devices, as well as update firmware on multiple devices.

More from the Manufacturer

Monitor, control and reboot a UPS system over your local area network (LAN)

Eaton Tripp Lite series WEBCARDLXE Network Management Card allows any compatible UPS system to function as a managed device on your network. Simply insert the card into an accessory slot and use SNMP, a web browser, SSH or Telnet to access, monitor, control and reboot the UPS. The WEBCARDLXE uses an HTML5-based interface, meaning Java isn’t needed.

Innovative features for premium performance

Remotely monitor and reboot network equipment

Reboot locked network equipment without an on-site visit or disruption of power to other loads (when used with controllable outlets or remotely switchable outlets on select devices).

Connect the WEBCARDLXE to EnviroSense2 sensors (up to three, sold separately) to enable site monitoring of environmental status (features vary by sensor).

Control access and stay informed with event notifications

With the WEBCARDLXE, you can assign different levels of access, from full administrator to view-only operator. Multiple user support allows viewing by more than one user simultaneously.

Create an encrypted connection using your Web browser’s SSL setting.

Receive notification of events and power conditions with email messages or SNMP traps.

Automatically shut down remote operating systems over your network.

Hassle-free compatibility

Available as a free download, PowerAlert Element Manager (PAEM) software consolidates different management utilities and simplifies the software-based maintenance of WEBCARDLXE.

WEBCARDLXE supports multiple protocols, including IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2c, SNMPv3, Telnet, SSH, FTP and DHCP.

10/100 Mbps auto-sensing ensures optimal communication compatibility.

DHCP/manual configuration support permits network settings to be assigned automatically or manually.