Uniqcli
APC NetShelter Rack PDU Advanced, Switched Metered Outlet, 3Phase, 17.3kW, 208V 60A, 42 Outlets, 460P9
Schneider Electric

APC NetShelter Rack PDU Advanced, Switched Metered Outlet, 3Phase, 17.3kW, 208V 60A, 42 Outlets, 460P9

Switched - IEC 60309 60A 3P+PE - 21 x IEC 60320 C13/C15, 21 x IEC 60320 C13/C15/C19/C21 - 208 V - 5.91 ft Cord Length - 0U - Vertical - Rack - TAA Compliant

SKU
APDU10452SM
Category
PDUs

MSRP$7,850.00

$5,245.95

Save 33%
Back ordered

Back ordered — ships when restocked.

Get a quote

Genuine Schneider Electric through authorized distribution — TAA country-of-origin verified and NDAA §889 screened before checkout.

SKU
APDU10452SM
Category
PDUs

Overview

APC NetShelter Rack PDU Advanced provide reliable power distribution to IT Equipment within server and/or networking racks. Switched outlets to turn outlets on or off remotely. Outlet and PDU level power metering for power visibility and notification of potential overload. 4-in-1 combination outlets which can be used as either C13, C19, C15, or C21 outlets provide unparalleled deployment flexibility. Maximum outlet density with 42 outlets in a 2.2" wide form factor. Outlets on the PDUs are color coded and/or labeled by breaker and input phase on 3 phase models to simplify deployment. Provides an alternating phase design whereby each of the 3 phases are organized into small outlet groups which alternate from top to bottom of the PDU to facilitate better power cord management and promote better load balancing. Power Sharing allows PDUs cascaded together via 2 ethernet ports enable an Network Management Card to continue functioning in the event of an AC power loss. No interruption in Network communication, sensors operation, and alarm traps. Live Swap Network Management Card (NMC) which can be replaced without powering down the PDU or connected devices to minimize downtime in the unlikely event of an NMC power event. Rated and approved to operate up to 60C (140F) at full load ensures reliability and availability even in today's high density deployments. Gigabit ethernet to enhance and standardize network connectivity across all assets in the data center. A second ethernet port (10/100) is available to allow cascading to other PDUs, connect to a 2nd private network, or provide network redundancy. 1% metering accuracy for the peace of mind to use NetShelter Rack PDU Advanced to bill based on power usage. In addition, the higher level of accuracy ensures the most precise measures for capacity planning and threshold alarm monitoring. Two environmental sensor ports allow for optional sensors (sold separately) to be connected.

Warranty

Limited Warranty: 3 Year

Highlights

  • Input: 3PH, 460P9
  • Outlets: (21) C13/C15/C19/C21, (21) C13/C15
  • Full-featured network management capability
  • Interactive LCD display
  • Active power measurements (volts, amps, kW, kWh)
  • 3-year APC warranty

Specifications

Product TypePDU
Input Voltage208 V
Manufacturer Part NumberAPDU10452SM
Limited Warranty3 Year
Output Voltage208 V AC
Weight (Approximate)24.91 lb
Form FactorRack
Input Current60 A
ManufacturerSchneider Electric SA
Product NameNetShelter 42-Outlets PDU
Product LineNetShelter
Rack Height0U
Brand NameAPC
Plug/Connector TypeIEC 60309 60A 3P+PE
Input Voltage Range200 V AC - 240 V AC
PlacementSide
Country of OriginIndia
Cord Length5.91 ft
Height70.1"
Width2.2"
Depth3"
PhaseThree Phase
Receptacle TypeIEC 60320 C13/C15/C19/C21, IEC 60320 C13/C15
Environmentally FriendlyYes
TAA CompliantYes
PDU TypeSwitched
Mounting OrientationVertical
Power Rating (VA)17.30 kVA
Power Rating (Watt)17.30 kW
Product ColorBlack
Color FamilyBlack
Receptacle Detail21 x IEC 60320 C13/C15, 21 x IEC 60320 C13/C15/C19/C21
Environmental ComplianceWaste Electrical and Electronic Equipment Directive (WEEE), Restriction of Hazardous Substances (RoHS), China Restriction of Hazardous Substances (China RoHS), Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
Single-use Plastic (SUP) Free Shipping PackagingNo

Downloads

Get a Schneider Electric quote

Send a bill of materials or part numbers — we confirm stock, TAA country of origin and a below-market total. No payment up front.