Eaton Tripp Lite Series Cable Ladder, 2 Sections - SRCABLETRAY or SRLADDERATTACH Required, 10 x 1.5 ft. (3 x 0.3 m)

Eliminate Cable Stress by Organizing Cabling Outside Your Enclosure or Open Frame Rack

The SmartRack SRCABLELADDER18 mounts to the top of your rack enclosure or open frame rack for overhead cable routing. Install it either parallel or perpendicular to the rack for clean, organized cable routing across an aisle or within a row. Each SRCABLELADDER measures 10 feet long and 1.5 feet wide for safe cable bundling. It requires the use of Tripp Lite's SRCABLETRAY (for enclosures) or SRLADDERATTACH (for open frame racks) for installation (both accessories sold separately). An included grounding stud allows tie-in to the rack and facility ground. The SRCABLELADDER18 ships in two five-foot sections for convenient storage and assembly.

Typical Applications

• Neatly bundle cable across an aisle or within a row of bayed racks in your data center

System Requirements

• SRCABLETRAY (rack enclosures) or SRLADDERATTACH (open frame racks)

More from the Manufacturer

Modular 18 in. Aluminum Cable Ladder De-Clutters Crowded Rack Environments

Tripp Lite’s SRCABLELADDER18 cable ladder mounts above server racks to keep cable organized and secure. This sturdy 10 ft. long x 18 in. wide aluminum ladder comes in 2 sections and is ideal for keeping data center cable organized and protected. It ships with all necessary assembly pieces and is an easy-to-install, conveniently customizable part of a series of SmartRack ladders, trays and other accessories.

10 ft. x 1.5 ft. cable ladder connects to a cable tray or mounts on top of an open frame rack

Installs parallel or perpendicular to a rack to reduce cable clutter

Works in tandem with Tripp Lite SRCABLETRAY or SRLADDERATTACH (sold separately)

Sturdy aluminum construction; lighter than comparable steel models

Arrives in dual 5 ft. sections for easy shipping, storage and assembly

Typical Applications

Neatly bundle cable across an aisle or within a row of bayed racks in your data center

Extend a SmartRack ladder series cable run an additional 10 ft. (SRLADDERATTACH required, sold separately)

Lay cable along the top of the SRCABLELADDER18 to prevent it from cluttering server racks and data center floors, and to protect it against damaging pinches, pulls and other environmental hazards. It can also help you properly bundle and segregate power cable from data cable for PoE applications.

Modular Design for Flexible Installation Options

The SRCABLELADDER18 is part of Tripp Lite’s series of SmartRack cable ladder and connection accessories, which work in conjunction to mount the ladder parallel or perpendicular to racks, across aisles, and along walls and ceilings. You can easily connect it to a Tripp Lite cable tray (SRCABLETRAY) on top of a rack enclosure or to another cable ladder (with SRLADDERATTACH) to extend your cable run (one of these two connection pieces are required for SRCABLELADDER18 installation).