Tripp Lite by Eaton MTP/MPO Multimode Base-8 Trunk Cable 24-Strand 40GB/100GB 40/100GBASE-SR4 OM4 Plenum-Rated (3xF/3xF) Push/Pull Tab Magenta 61 m (200 ft.)

The 61-meter (200-foot) N858-61M-3X8-MG MTP/MPO Multimode Base-8 Trunk Cable supports 40/100 Gb Ethernet speeds and is designed for high-density connections between network equipment in telecommunication rooms and data centers.With three female MTP/MPO connectors on each end, this OM4-rated multimode fiber optic cable is recommended for high-density fiber patching between data center MDFs (main distribution frames) and IDFs (intermediate distribution frames). It's colored magenta for instant identification as an OM4 cable. Push/pull tab connectors are easily accessible in high-density data center applications and make the cable easy to install and remove with one hand. The 8-fiber MTP/MPO connectors are about the same size as SC connectors, but are 12 times denser, freeing up rack space for other cables. Optimized for QSFP+ 40GBASE-SR4 and QSFP28 100GBASE-SR4 networks, this cable is tested for low insertion loss and back reflection on every connector and attenuation loss that meets or exceeds current standards. The 5.6-millimeter ruggedized plenum-rated jacket and bend-insensitive fiber are perfect for connecting high-speed network components in ceilings, walls and ducts.

Features

OM4-Rated for 40/100 Gb Ethernet Applications

• Designed to extend high-density connections between network equipment in telecom rooms and data centers

• Recommended for patching between data center MDFs and IDFs

• Optimized for QSFP+ 40GBASE-SR4 and QSFP28 100GBASE-SR4 networks

• Magenta-colored for identification as an OM4 cable

MTP/MPO Connectors with Push/Pull Tabs

• 8-fiber female connectors 12 times denser than SC connectors

• Push/pull tab connectors easy to install and remove with one hand

• 100% tested for low insertion loss and back reflection

Error-Free Signal Transfer

• 50/125 duplex glass fiber construction

• Plenum-rated jacket and bend-insensitive fiber perfect for ceilings, walls and ducts

More from the Manufacturer

Multimode Fiber Optic Base-8 Trunk Cable for Transmitting 40/100 Gb Data/Voice Signals

Tripp Lite’s N858-61M-3X8-MG is recommended for high-density connections between network equipment in telecommunication rooms and data centers. Colored magenta for instant identification as an OM4 cable, this 61-meter (200-foot) cable supports 40/100 Gb Ethernet speeds for patching between data center MDFs (main distribution frames) and IDFs (intermediate distribution frames).

Female MTP/MPO Connectors with Easy-to-Connect Push/Pull Tabs

The 8-fiber MTP/MPO connectors (three on each end) are about the same size as SC connectors, but are 12 times denser, which leaves more room in racks for other cables. Push/pull tab connectors make the cable easy to install and remove with one hand, which is an advantage in tightly packed patch panels and switches. The N858-61M-3X8-MG is 100% tested for low insertion loss and back reflection on every connector and attenuation loss that meets or exceeds current standards.

Top-Quality Construction for Error-Free Signal Transfer

Optimized for QSFP+ 40GBASE-SR4 and QSFP28 100GBASE-SR4 networks, the N858-61M-3X8-MG is constructed using 50/125 duplex (zipcord) fiber made from glass. The 5.6-millimeter ruggedized plenum-rated jacket and bend-insensitive fiber are designed for connecting high-speed network components in ceilings, walls and ducts.

Trunk Cabling Saves You Time and Money

Because fiber termination is performed in a controlled environment, the N858-61M-3X8-MG has the advantage of factory assembly and inspection. The preassembled MTP/MPO connectors can be inserted in your network right out of the box, cutting down on installation time and sparing you the effort of splicing cable.

Lifetime Warranty and Environmentally Responsible Design

The N858-61M-3X8-MG comes with a lifetime warranty. It’s manufactured in compliance with strict RoHS specifications, reflecting Tripp Lite’s commitment to environmental responsibility.

Tripp Lite N858-61M-3X8-MG Product Summary

Gb Ethernet applications

Optimized for QSFP+ 40GBASE-SR4 Premium multimode Base-8 trunk cable

Three 8-fiber MTP/MPO connectors on each end

OM4-rated for 40/100 and QSFP28 100GBASE-SR4 networks

Push/pull tab connectors install/remove with one hand

Plenum-rated jacket and bend-insensitive fiber for connecting in ceilings, walls and ducts

100% tested for low insertion loss and back reflection

Magenta color for easy OM4 identification

Lifetime warranty

Why Choose Tripp Lite?

Founded in 1922 in Chicago, Illinois, Tripp Lite is a leading manufacturer of products to power, protect, manage, house, cool, connect and mount your equipment. With a large selection of connectivity products, Tripp Lite has everything from USB hubs and reversible USB cables to fiber-optic cables and over Cat5e/Cat15 signal extenders. Whether you need to connect high-speed networks to switches, routers and servers in your data center, or send high-resolution video signals to displays and digital signs, Tripp Lite has the complete solution. Plus, before and after your purchase, our Chicago-based, in-house technical support specialists are available to assist you by phone, email and live chat. With 95 years of quality products and service, Tripp Lite is a brand you can trust.